Certifications and Approvals

Fox Products ISO FM FMc CRN ASME IX CE EMC LVD
FT1 N/A N/A
FT2A
FT3
Fox Products PED ATEX IECEx NAMUR NACE EPA BSEE MA Prod. AB32
FT1 N/A  
FT2A      
FT3
Note: Please contact us for more specific product certifications, approvals, or compliance information.


Fox Products Datasheets ISO FM FMc CRN ASME IX CE EMC LVD PED ATEX IECEx NAMUR NACE EPA BSEE MA Prod. AB32
FT1 N/A N/A N/A  
FT2A      
FT3
Note: Please contact us for more specific product certifications, approvals, or compliance information.

Organization / Agency Territory View Certificate Description
ISO 9001:2008 Quality Certification Global ISO 9001:2008 ISO 9001:2008
ISO 9001: 2008 is an international standard related to quality management systems, applicable to any organization from all types of business sectors and activities. ISO 9001:2008 is based on eight quality management principles (all fundamental to good business practice). The organization must fully adopt the principles and pass a full inspection and audit of the organization’s quality management system, policies, and procedures.
FM Approvals USA Fox FM (US) FT1 Certificate

Fox FM (US) FT2A Certificate

Fox FM (US) FT3 Certificate
FM Approvals
Factory Mutual is a certification company focused on property loss prevention. FM completes scientific research and testing on each of the products they certify. Fox product approvals for the US (FM) can be reviewed on the model datasheets.
FMc Approvals Canada Fox FM (Canada) FT1 Certificate

Fox FM (Canada) FT2A Certificate

Fox FM (Canada) FT3 Certificate
FMc Approvals
Factory Mutual is a certification company focused on property loss prevention. FM completes scientific research and testing on each of the products they certify. Fox product approvals for Canada (FMc) can be reviewed on the model datasheets.
CRN Canada Alberta Certificate

BC Certificate

Manitoba Certificate

Ontario Certificate

Quebec Certificate

Saskatchewan Certificate

Multiple Province Certificate
CRN
The Canadian Registration Number (CRN) is issued by each Canadian province or territory. It covers pressure valves, fittings, or pressure piping. It is a necessary authorization to allow these components to be in operation in Canada.
ASME Welder Certification Global Fox Welding Statement

ASME IX
Welding qualifications to ASME IX are for use with the ASME pipework codes and demonstrates fabrication accreditation. View the Fox Statement regarding Welder Qualifications for ASME.
CE Mark European Union EC Declaration of Conformity - FT1

EC Declaration of Conformity - FT2A

EC Declaration of Conformity - FT3

Fox Pressure Equipment Directive (PED) Certificate
CE Mark
The CE Mark is a mandatory conformity marking for certain products sold within the European Economic Area (EEA).
EMC – EU Directive 2014/30/EU
The aim of this Directive is to regulate the electromagnetic compatibility of equipment. It aims to ensure the functioning of the internal market by requiring equipment to comply with an adequate level of electromagnetic compatibility.
Low Voltage Directive (LVD) – EU Directive 2014/35/EU
Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonization of the laws of the Member States relating to Electrical Equipment designed for use within certain voltage limit.
Pressure Equipment Directive (PED) – EU Directive 2014/68/EU
The PED Directive 2014/68/EU arises from the European Community's Program for the elimination of technical barriers to trade. Its purpose is to harmonize national laws of EU Member States regarding the design, manufacture, testing and conformity assessment of pressure equipment and assemblies of pressure equipment.
ATEX Certificate - QAN European Union FT1 FM Approvals ATEX Certificate

FT3 FM Approvals ATEX Certificate

Fox ATEX BS EN 13980:2002 (QAN)
ATEX – BS EN 13980 2002 – Application of quality systems
This standard specifies information as well as particular requirements related to the establishment and the maintenance of a quality system of a manufacturer of products intended to be used in explosive atmospheres. It is supposed to serve as a basis for the initial assessment as well as subsequent visits paid to the system in the frame the quality system assessment related to manufacturers as executed by bodies notified for the EU Directive 94/9/CE.
ATEX –94/9/EC – Equipment for use in Potentially Explosive Atmospheres
The ATEX directive 94/9/EC approvals cover equipment and protective systems intended for use in potentially explosive atmospheres.
IECEx - QAR Global Fox IECEx OD 005-1:2010 (QAR)

Fox FT1 IECEx Cert. of Conformity

Fox FT3 IECEx Cert. of Conformity
IECEx – OD 005-1 2010 - Application of quality systems
The objective of the IECEx system is to facilitate international trade in equipment and services for use in explosive atmospheres, while maintaining the required level of safety: reduced testing and certification costs to manufacturer.
IECEx – IEC 60079 - Equipment for use in Potentially Explosive Atmospheres
Certification of products under the IEC standard occurs after the manufacturer’s quality system relating to the Ex products was assessed and found to comply with the IECEx Quality system requirements for equipment for use in potentially explosive atmospheres.
NAMUR International Fox Statement re: NAMUR NE 43 NAMUR NE43
NAMUR is an international user association of automation technology in process industries. NE43 is the standardization of the signal level for the failure information of digital transmitters. The aim of this recommendation is the standardization of the signal level of failure information in the analog current signal, thus creating the basis for taking advantage of the failure signal in process control strategies without any problems and with a minimum of additional effort.
NACE Material Requirements International Fox NACE Compliance National Association of Corrosion Engineers (NACE) Material Requirements - MR0175
NACE MR0175 gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure could pose a risk to the health and safety of the public and personnel or to the equipment itself.
US EPA Compliance United States Fox EPA Compliance Statement U. S. Environmental Protection Agency (EPA)
Fox Thermal Instruments’ thermal gas mass flowmeters meets the accuracy requirements for Greenhouse gas (GHG) reporting (CFR Title 40, Part 98).
BSEE Compliance United States BSEE Compliance Statement

Example of Zero CAL-CHECK Certificate

Example of CAL-V Certificate
U.S. Bureau of Safety and Environmental Enforcement (BSEE)
BSEE operations are governed by a wide variety of laws, regulations, and other communications with the offshore industry. The Bureau enforces compliance with these regulations and periodically updates rules to reflect advancements in technology and new information.
MA Product Certification United States MA Product Acceptance (FT1)

MA Product Acceptance (FT2A)

MA Product Acceptance (FT3)
Massachusetts Division of Professional Licensure - Product Certification
The Division of Professional Licensure (DPL) is an agency within the Office of Consumer Affairs and Business Regulation. To protect the public health, safety and welfare by licensing qualified individuals and businesses to provide services to consumers, and by fair and consistent enforcement of the licensing laws and regulations.
  United States AB32 Compliance California Assembly Bill 32 Compliance
The California Assembly Bill 32 (AB32), sets in motion regulatory and market mechanisms to reduce greenhouse gas(GHG) emissions. The full scope of the GHG rules took effect in January of 2012. AB 32 requires the Air Resources Board(ARB) to monitor and enforce compliance with regulations set forth in the program.

Copyright © 2017